REVISED 2012 Basic Electrical Electronics Engineering Mumbai University

REVISED 2012 Basic Electrical  Electronics Engineering (BEE) Mumbai University

REVISED 2012 Basic Electrical  Electronics Engineering  Mumbai University

Syllabus For Basic Electrical Electronics Engineering (BEE)
 Prerequisite
 A. Concept of e.m.f, potential difference, current, ohm’s law, resistance,
resistivity, series and parallel connections, power dissipation in resistance,
effect of temperature on resistance
B. Capacitors, with uniform and composite medium, energy stored in
capacitor, R-C time constant.
C. Magnetic field, Faraday’s laws of Electromagnetic induction, Hysterics
and eddy current losses, energy stored in an inductor, time constant in R-L
circuit. (No questions to be asked in Theory paper on Prerequisite )


Chapter 1
D.C. circuits: (only independent sources).
Kirchhoff ’s laws, Ideal and practical voltage and current source, Mesh and
Nodal analysis (super node and super mesh excluded), Source
transformation, Star-delta transformation ,Superposition theorem,
Thevenin’s theorem, Norton’s theorem, Maximum power transfer theorem,
(Source transformation not allowed for Superposition theorem, Mesh and
Nodal analysis)


Chapter 2
A.C Circuits :
Generation of alternating voltage and currents, RMS and Average value,
form factor , crest factor, AC through resistance, inductance and capacitance,
R-L , R-C and R-L-C series and parallel circuits, phasor diagrams , power
and power factor, series and parallel resonance, Q-factor and bandwidth


Chapter 3
Three phase circuits :
Three phase voltage and current generation, star and delta connections
(balanced load only), relationship between phase and line currents and
voltages, Phasor diagrams, Basic principle of wattmeter, measurement of
power by two wattmeter method


Chapter 4
Single phase transformer :
Construction, working principle, Emf equation, ideal and practical
transformer, transformer on no load and on load, phasor diagrams,
equivalent circuit, O.C. and S.C test, Efficiency


Chapter 5
Electronics(no numericals):
Semiconductor diode, Diode rectifier with R load: Half wave, full wave–
center tapped and bridge configuration,RMS value and average value of
output voltage, ripple factor, rectification efficiency, introduction to C and L
filter (no derivation). CE, CB, CC transistor configuration, CE input-output
characteristics.


Recommended Books
Text Books
1.  V. N. Mittal and Arvind Mittal “Basic ElectricalEngineering” Tata McGraw Hill, (Revised
Edition)
2.  Electrical Engineering Fundamentals” by Vincent Del Toro, PHI Second edition ,2011
3.  Electronics Devices & Circuit Theory” byBoylestad, Pearson Education India
4.  Edward Hughes: Electrical and Electrical Technology, Pearson Education (Tenth edition)
5.  D P Kothari and I J Nagrath “Theory and Problems of Basic Electrical Engineering”, PHI 13 th
edition 2011.
Reference Books:
1.  B.L.Theraja “Electrical Engineering “ Vol-I and II,
2.  S.N.Singh, “Basic Electrical Engineering” PHI , 2011